MARS-26-0408 Inspected
Fastener pull-through specimens. Linked through ION run records to print, oven, furnace, inspection and image data.
Material systemC/SiC (PIP)
Layup0/45/90/-45 x4
Fiber lotT700-2604-80
Resin lotRS-56A
Printed09/06/2026 01:20
Printed mass146.94 g
PIP cycles done4, mass gain 50.2%
Current stepDimensional inspection
Process history (ION)
| # | Procedure | Completed | Operator | Recorded values |
|---|---|---|---|---|
| 1 | CF3D Print RUN-18975 |
09/06/2026 04:41 | Marisol Vega | Print job ID: J-26-0408, Program: Fastener pull-through specimens, Material system: C/SiC (PIP), Layup: 0/45/90/-45 x4, Fiber lot: T700-2604-80, Resin lot: RS-56A, Printed mass (g): 146.94 |
| 2 | Grieve Oven Operation RUN-18977 |
09/07/2026 10:17 | Marisol Vega | Oven program: Post-cure 177C, Cycle start: 2026-09-07T01:41 |
| 3 | Polymer Infiltration and Pyrolysis Cycle RUN-18979 |
09/10/2026 15:57 | Marisol Vega | Cycle number: 1, Mass before infiltration (g): 146.94, Mass after pyrolysis (g): 179.96, Precursor: SMP-10 |
| 4 | GCF Furnace Operation RUN-18981 |
09/10/2026 15:57 | Marisol Vega | Furnace: Small GCF, Furnace cycle ID: GCF-S-0408-1, Peak setpoint (C): 1200 |
| 5 | Polymer Infiltration and Pyrolysis Cycle RUN-18984 |
09/12/2026 08:43 | Marisol Vega | Cycle number: 2, Mass before infiltration (g): 179.96, Mass after pyrolysis (g): 201.46, Precursor: SMP-10 |
| 6 | GCF Furnace Operation RUN-18985 |
09/12/2026 08:43 | Marisol Vega | Furnace: Small GCF, Furnace cycle ID: GCF-S-0408-2, Peak setpoint (C): 1000 |
| 7 | Polymer Infiltration and Pyrolysis Cycle RUN-18987 |
09/14/2026 21:34 | Marisol Vega | Cycle number: 3, Mass before infiltration (g): 201.46, Mass after pyrolysis (g): 213.74, Precursor: SMP-10 |
| 8 | GCF Furnace Operation RUN-18990 |
09/14/2026 21:34 | Marisol Vega | Furnace: Small GCF, Furnace cycle ID: GCF-S-0408-3, Peak setpoint (C): 1000 |
| 9 | Polymer Infiltration and Pyrolysis Cycle RUN-18992 |
09/16/2026 12:26 | Marisol Vega | Cycle number: 4, Mass before infiltration (g): 213.74, Mass after pyrolysis (g): 220.67, Precursor: SMP-10 |
| 10 | GCF Furnace Operation RUN-18993 |
09/16/2026 12:26 | Marisol Vega | Furnace: Small GCF, Furnace cycle ID: GCF-S-0408-4, Peak setpoint (C): 1000 |
| 11 | Surface grind a-bars RUN-18994 |
09/17/2026 10:35 | Marisol Vega | A-bars cut: 3, Grind wheel: Diamond 120 grit |
| 12 | Dimensional inspection RUN-25598 |
09/18/2026 11:10 | Marisol Vega | CMM report exported: Yes, Program: MARS_ABAR_V2 |
Densification by PIP cycle
Print job
| Job | Machine | Layers | Avg tow tension (N) | Fault events |
|---|---|---|---|---|
| J-26-0408 | CF3D Robot | 13 | 21.76 | 2 |
Oven and furnace cycles
| Cycle | Machine | Started | Peak setpoint (C) | Max soak dev. (C) | Result |
|---|---|---|---|---|---|
| GO-RUN-18977 | Grieve Oven | 09/07/2026 01:41 | 177.0 | 2.20 | Within tolerance |
| GCF-S-0408-1 | Small GCF | 09/09/2026 23:35 | 1,200.0 | 4.40 | Within tolerance |
| GCF-S-0408-2 | Small GCF | 09/11/2026 19:29 | 1,000.0 | 4.00 | Within tolerance |
| GCF-S-0408-3 | Small GCF | 09/14/2026 07:58 | 1,000.0 | 4.20 | Within tolerance |
| GCF-S-0408-4 | Small GCF | 09/15/2026 20:40 | 1,000.0 | 3.60 | Within tolerance |
Inspection
| Feature | Characteristic | Nominal | Measured | Tolerance | Deviation | Result |
|---|---|---|---|---|---|---|
| LENGTH | Distance | 152.4000 | 152.3692 | 0.2500 | -0.0308 | Within tolerance |
| WIDTH | Distance | 25.4000 | 25.3851 | 0.1500 | -0.0149 | Within tolerance |
| THK_1 | Thickness | 4.8000 | 4.9154 | 0.2000 | 0.1154 | Within tolerance |
| THK_2 | Thickness | 4.8000 | 4.8595 | 0.2000 | 0.0595 | Within tolerance |
| THK_3 | Thickness | 4.8000 | 4.9003 | 0.2000 | 0.1003 | Within tolerance |
| FLAT_TOP | Flatness | 0.0000 | 0.0506 | 0.1000 | 0.0506 | Within tolerance |
| HOLE_1 | Diameter | 6.3500 | 6.3535 | 0.0500 | 0.0035 | Within tolerance |
| HOLE_2 | Diameter | 6.3500 | 6.3710 | 0.0500 | 0.0210 | Within tolerance |
CMM report MARS-26-0408_20260918_1035.csv, inspected 09/18/2026 10:35
| Region | Sa (um) | Sq (um) | Sz (um) | Sdr % |
|---|---|---|---|---|
| Top face | 3.046 | 3.869 | 30.70 | 4.98 |
| Edge | 2.208 | 2.804 | 20.13 | 5.66 |
| Bottom face | 2.967 | 3.769 | 25.80 | 2.62 |
Height map, optical profilometer. Image stored in blob storage.
Images
Digital Optical Microscope, 200xCross-section B, 09/18/2026 11:35
SEM, 500xas-ground edge, 09/18/2026 13:35
Data as of pipeline run R-20261105-0200, finished 11/05/2026 02:00 Mountain. Tables: mars.gold and mars.ops.