MARS-26-0445 In process
Leading edge coupons, C/SiC. Linked through ION run records to print, oven, furnace, inspection and image data.
Material systemC/SiC (PIP)
Layup0/90 x12
Fiber lotT700-2607-37
Resin lotRS-48A
Printed10/27/2026 06:21
Printed mass82.09 g
PIP cycles done3, mass gain 39.7%
Current stepPolymer Infiltration and Pyrolysis Cycle
Process history (ION)
| # | Procedure | Completed | Operator | Recorded values |
|---|---|---|---|---|
| 1 | CF3D Print RUN-19703 |
10/27/2026 09:49 | Marisol Vega | Print job ID: J-26-0445, Program: Leading edge coupons, C/SiC, Material system: C/SiC (PIP), Layup: 0/90 x12, Fiber lot: T700-2607-37, Resin lot: RS-48A, Printed mass (g): 82.09 |
| 2 | Grieve Oven Operation RUN-19706 |
10/28/2026 14:49 | Marisol Vega | Oven program: Post-cure 177C, Cycle start: 2026-10-28T06:49 |
| 3 | Polymer Infiltration and Pyrolysis Cycle RUN-19707 |
10/30/2026 14:18 | Marisol Vega | Cycle number: 1, Mass before infiltration (g): 82.09, Mass after pyrolysis (g): 98.63, Precursor: SMP-10 |
| 4 | GCF Furnace Operation RUN-19710 |
10/30/2026 14:18 | Marisol Vega | Furnace: Small GCF, Furnace cycle ID: GCF-S-0445-1, Peak setpoint (C): 1200 |
| 5 | Polymer Infiltration and Pyrolysis Cycle RUN-19712 |
11/02/2026 06:38 | Marisol Vega | Cycle number: 2, Mass before infiltration (g): 98.63, Mass after pyrolysis (g): 108.42, Precursor: SMP-10 |
| 6 | GCF Furnace Operation RUN-19715 |
11/02/2026 06:38 | Marisol Vega | Furnace: Small GCF, Furnace cycle ID: GCF-S-0445-2, Peak setpoint (C): 1000 |
| 7 | Polymer Infiltration and Pyrolysis Cycle RUN-19717 |
11/04/2026 07:27 | Marisol Vega | Cycle number: 3, Mass before infiltration (g): 108.42, Mass after pyrolysis (g): 114.69, Precursor: SMP-10 |
| 8 | GCF Furnace Operation RUN-19720 |
11/04/2026 07:27 | Marisol Vega | Furnace: Small GCF, Furnace cycle ID: GCF-S-0445-3, Peak setpoint (C): 1000 |
Densification by PIP cycle
Print job
| Job | Machine | Layers | Avg tow tension (N) | Fault events |
|---|---|---|---|---|
| J-26-0445 | CF3D Robot | 14 | 23.11 | 2 |
Oven and furnace cycles
| Cycle | Machine | Started | Peak setpoint (C) | Max soak dev. (C) | Result |
|---|---|---|---|---|---|
| GO-RUN-19706 | Grieve Oven | 10/28/2026 06:49 | 177.0 | 2.50 | Within tolerance |
| GCF-S-0445-1 | Small GCF | 10/29/2026 22:01 | 1,200.0 | 4.00 | Within tolerance |
| GCF-S-0445-2 | Small GCF | 11/01/2026 12:57 | 1,000.0 | 3.50 | Within tolerance |
| GCF-S-0445-3 | Small GCF | 11/03/2026 18:04 | 1,000.0 | 3.90 | Within tolerance |
Inspection
This part has not been inspected yet.
Data as of pipeline run R-20261105-0200, finished 11/05/2026 02:00 Mountain. Tables: mars.gold and mars.ops.